Your location now lies: Home > Products Center > VMC1060 vertical machining center

Name:VMC1060 vertical machining center

Introduction:


 First, the main use:


The machining center of vertical bed type structure, X, Y axis and Z coordinate control, maximum fast transfer speed of 20m/min (Z axis: 15m/min); spindle servo motor drive, power is 7.5/11Kw, maximum speed up to 8000rpm; Taiwan imported silver double nut preloading C3 and heavy load ball screw linear rolling guide screw, both ends of the pre stretching mechanism, which greatly eliminates the influence of hot deformation on the precision of the machine tool, machine tool positioning accuracy of + 0.005mm, repeat positioning accuracy of + 0.003mm; imported Taiwan knife, the knife changing capacity of 16-24 optional, accurate and reliable, the fastest tool change time less than 2.5 seconds; CNC machine tool the operating system is the customer demand, the machine can achieve all kinds of disc type, plate, shell, cam, mold and other complex parts in a fixture for drilling, milling, boring, reaming, reaming, tapping and other A process, suitable for many varieties, small batch production, for the complex, high precision machining parts can show its superiority; fourth, fifth axis machine tools such as configuration, can achieve high efficiency and high precision automatic machining of complex rotary parts. The machine tool is suitable for aviation, aerospace, military, national defense, automobile, motorcycle, engineering machinery, refrigeration, petrochemical, rolling stock and other industries of small and medium-sized parts of high efficiency, high precision and automatic processing.


Two. Main structural features:


* high rigidity: the bed type machining center structure, composition of machine tool is composed of a base, a sliding seat, table, column and spindle box; the main parts are the basis of the finite element analysis of the structure, reasonable structure, high rigidity;
High speed and high precision. The machine adopts high rigidity spindle unit imported from Taiwan, main material selection of high performance alloy, using NSK special P4 high-speed precision spindle bearings, and use NSK to specify the high speed grease, spindle speed of 8000rpm, the spindle radial runout is less than 0.005/300. Cooling water or spindle can achieve center spindle nose water outlet center, spindle configuration function, can handle some sticky cone off chip and other debris, protect the spindle and handle life.
. X, Y, Z direction feed using C3 double precision ball screw nut of the pre load, large torque and low inertia servo motor through flexible coupling and direct import screw, screw bearing with pre stretching structure can eliminate the transmission backlash and pre compensation machine long time effect of deformation on the accuracy of the operation of heat to ensure the accuracy and repeatability of positioning;


Three 、 VMC1060 vertical machining center technical parameters

项 目

单位

技术参数

X轴行程

mm

1000

Y轴行程

mm

600

Z轴行程

mm

600

主轴鼻端至工作台面距离

mm

70-670

主轴中心至立柱导轨面距离

mm

650

X/Y轴快速进给

mm/min

20000

Z轴快进给

mm/min

15000

切削进给

mm/min

1-10000

定位精度

mm

±0.005/300

重复定位精度

mm

±0.003/300

工作台面积

mm

1300X600

工作台载重能力

kg

800

T型槽数/宽度/间距

mm

5/18/100

主轴最高转速

rpm

8000

主轴电机功率

kw

7.5

主轴鼻端锥度

 

BT40

刀库容量

24

换刀时间(刀对刀)

SEC

2.5

机床净重

kg

8000

外形尺寸

mm

3300×2600×2800